How to Remove Oil From Bowling Ball?

how to remove oil from bowling ball? Important question. Is your ball more responsive to a hook than it did when it was brand new? Is the shell feeling softer, smoother, and less tacky? The shell of your ball can absorb oil, even if it is cleaned regularly. It’s time to bake your ball if this happens.

This can be done in many ways, so it is important to choose the right strategy. The wrong technique can cause irreparable damage to your bowling ball. These are the methods I consider viable. We’ll discuss the pros and cons of each method, as well as why/why we shouldn’t use them.

It’s best to have the oil removed by your local Pro Shop. The Pro Shop should be able to extract the maximum amount of oil from the ball while also ensuring that nothing is damaged. The service will typically cost you a lot. This article is for you if you want to spend as little as possible to get as much oil from your ball.

How to Remove Oil From Bowling Ball?

There are many effective ways to remove oil from the ball. These will allow it to last as long as possible. It is important to know when the ball needs to be cleaned. This will allow you to maintain the ball’s condition. You can clean your bowling ball at home, but it is much more convenient to have it cleaned by professionals. If you own an oil extraction machine, you can clean the bowling ball yourself.

Expert stores have speedball spinners that are superior and can also be equipped with Abralon grains and other screening pads. All the accessories required to complete the job properly are available at the expert stores.

Use an oil extraction machine to remove oil from your bowling ball.

The Best Methods How to Remove Oil from a Bowling Ball

Use A High-speed Ball Spinner

High-speed ball spinners or screening pads with varying grit are the best options. This is a specialized ball cleaning machine. Both will prepare the exterior to your desired texture. The friction heat generated by the spinner turns the ball and opens its pores. Low gravel pads are easier to use than high grit pads and unbolt the pores. Check the best ball spinners here.

Use A High-speed Ball Spinner

Apply cleaning detergents to the pores as they become exposed. Make sure to finish the surface preparations before you go. Use a soft cloth to wipe the surface of the ball that was initially cleaned. Once the bowling ball oil is removed, choose a surface that rhymes with the assumed lane conditions.

Let a Professional Employee From a Store Clean Your Ball

The system is subjectively expensive and a professional will clean and polish your ball. Your professional can also point out damage you may not have noticed.

Your pro shop may take longer to clean your ball, but it should usually take less than an hour. This is enough time to play some games if you have a spare ball.

Let a Professional Employee From a Store Clean Your Ball

You can also run errands or do chores while you wait. This will ensure that you don’t become bored cleaning the ball.

Hot Water and Dawn Dish Soap

The dawn and hot water method can be used to remove bowling ball oil. These are the steps:

  • Use small pieces of pipe tap to cover the holes.
  • Fill a bucket of hot water to 120 degrees.
  • Place your bowling ball gently in the warm water bucket.
  • Mix 3 tablespoons dish detergent (Dawn), with 2 cups of water.
  • Use your hands to rub the dish detergent all over the bowling ball.
  • Keep the ball submerged for 3-4 minutes.
  • Use a towel to wipe the bowling ball clean.
  • Rinse the ball under the tap with hot water.
  • For the second time, pour hot water into a separate bucket with the ball. If you notice a soapy film on your skin, this means that there are more soap leftovers. To get rid of it completely, continue to wash the area with hot water.
  • Coverstock is porous and will absorb water. It is best to allow it to dry for at least a few days.

Hot Water Bath

Although there are many hot water bathing methods, the most effective is the simple hot water bath. This method is the easiest, most straightforward, and poses the lowest risk of damage. However, it requires commitment and time. Simply put your ball in hot water and let it soak for a while before cleaning it.

This is a safe method because the temperature of your tap water should not exceed 120-140 degrees F.

  1. Place the ball in a container or bucket that is deep enough for it to be completely submerged.
  2. Turn on the tap to heat it up (but not above 140°F) and then submerge your ball.
  3. After about 15 minutes, drain the water and give the ball a good scrub. Then, re-submerge it. Some people add Dawn dish soap at this stage to break down the oil. It is unnecessary for me. *
  4. Continue this process 3-4 more times until the ball feels clean.
  5. Use your preferred method to clean your ball. The tacky surface should be restored.
  6. Before you throw the ball, let it dry completely for at least one day.

This process can take quite some time. You will want to use your newly restored surface for bowling. This method is safe and effective, so it’s worth the wait. This method has one small drawback: you cannot visually see when the ball stops releasing oil, as you can with dry methods.

Ball Cleaning Spray

Ball cleaning sprays are a natural way to clean your ball. It is possible to spray clean bowling balls with equal amounts of water and simple green alcohol. To remove any oily residue, spray the ball with water and wipe the area with a towel. It will help to clean the oil from the ball before it is absorbed by the cover material. It can be found in superior bowling ball cleaners. This spray cleaner is better than the one you currently have.

Ball Cleaning Spray

Use Isopropyl Alcohol To Clean the Ball

  • It is possible to lighten the oil removal process by cleaning with isopropyl alcohol. This is how to clean the ball using alcohol at a lower level.
  • Mix isopropyl alcohol in a bowl with water. You should have a ratio of 4:2 water to isopropyl Alcohol
  • You can also dip a towel into the satisfaction, and then wring it out.
  • Use the towel to sweep the ball.
  • It should be allowed to rest in a safe place.
  • You can do this at home to remove any oil.

Clean the Ball With Rubbing Alcohol

Oil can be removed quickly by cleaning the ball with rubbing alcohol. This is how to clean your ball with Rubbing Alcohol.

  • Mix rubbing alcohol with water in a large bowl. You should use 4:2 water to rubbing alcohol.
  • Use a towel to soak in the solution.
  • Use the towel to sweep the ball.
  • It should be left alone in a safe place.

You can also de-oil the bowling ball at your home.

Immersion at Home (DIY Method)

DIY methods are the best way to get rid of oil from your bowling ball. We will now show you how to remove oil from your bowling ball using the immersion method at home.

Step 1 First, fill a bucket of hot water. Because oil is lighter than water, hot water will be able to lift the dirt off the ball surface. To get the best results, you can add cleaning agents or dishwasher detergent to the bucket. This one is a ball cleaning dishwasher. You can clean the ball’s surface with the right cleaning bowling balls agent. Give the bowling balls time to get into the pores.

Step 2 Place your ball on the fingers and cover it with waterproof masking tape You should make sure that the tap is completely covering the hole. Water can affect the ball’s performance if it gets in its finger holes. It is important to make sure that every fingertip is covered by the tap.

Immersion at Home

Step 3: Now, pour the water over the ball. You should soak the ball in warm water for enough time to ensure that there is no dirt on its cover. The recommended soak time is between twenty and thirty minutes.

Step 4: After soaking your ball for approximately twenty minutes, remove your ball from the bucket. Then place your bowling board. Keep the tap on the ball until it dries. This will prevent water from getting into your fingers.

Step 5 Use a soft towel to wipe down the ball. A microfiber towel is a better choice than a linen towel as it can absorb oil seven times faster than a linen towel. Once the ball has dried completely, turn off the tap. To remove any moisture, repeat the process and dry it once more. Your ball is now clean and ready for you to get back in the lane.

Is it Possible to Bake a Bowling Ball?

If the ball feels greasy and is less tacky despite frequent cleaning, it’s time to “bake”. This will remove any oil from the shell. There are many ways to “bake” the ball, including hot water, chemical use, and ultrasonic to remove oil.

Sometimes oil can be so ingrained on the surface that it is impossible to clean. The volatile resin that acts as a coverstock absorbs oil over time. To reduce the oil’s absorption, you can wipe it with a microfiber towel.

Is it Possible to Bake a Bowling Ball?

Heating the ball opens pores that allow oil to be released. To avoid cracks and damage to the resin surface, it is important to not heat the ball too much. Heating should be done gently as any rapid increase in temperature beyond 170 degrees F can cause damage. Baking can also be done in the oven. It is however not the best choice as it can be dangerous. If you’re really convinced, consider these steps:

  • While ensuring enough space for your ball, place the wire rack closest to the heating section.
  • To prevent heat from the main heat source, fix the second rack lower than the first.
  • To create a bed-like structure, place two microfiber towels vertically on the wire rack.
  • Place the ball on the towels, and turn the oven down to the lowest setting.
  • After two minutes, rotate the ball and wipe it with paper towels. It helps to reduce the risk of high temperatures by opening the oven occasionally.
  • Continue rotating the ball and rubbing it until no oil remains.
  • The ball should be cleaned and placed back in the oven. Allow the ball to cool down in the oven for at least an hour.
  • Take the ball out of the oven, and then clean it in the usual way.

How often Should Oil be Removed From a Bowling Ball?

You should clean your bowling ball at least six times per game. The ball’s lifespan will be extended if it is cleaned properly. According to the manufacturers, your ball will likely sustain some damage after it has been used for about seventy-five matches. To remove oil, you will need to reemerge your ball. The ball will normally return to its original reaction to the lane after resurfacing.


Further, I recommend that you take responsibility for your ball and treat it as personal property. Sharing your ball can increase the risk due to the fact that there are different weights and finger holes. Make sure your bowling equipment remains clean and safe. It also prevents other bowlers from getting hurt. If you don’t have the right equipment, bowling ball oil extraction can be quite tedious. For proper cleaning, a bowling ball cleaner can be used.

Remove Oil From Bowling Ball F.A.Q.

  • How often should you remove the oil from a bowling ball?

    Wait until you have bowled a lot of games. If you are regularly playing on oily lanes, it may be worth having the oil removed from your ball after 50 games. Your ball may only need to be cleaned once every 70-100 games for better regulated lanes.

    James Alston

    Sound engineer is my profession and bowling is a hobby, sport, and my great passion. Have plenty of memorable moments, experience, and frequently testing new bowling balls.

  • Does rubbing alcohol damage bowling balls?

    Isopropyl alcohol can dry out your bowling balls, making them more fragile and more susceptible to cracking. This can lead to poor performance. It is beneficial to kill any viruses in your bowling ball but it can also cause damage over time.

    James Alston

    Sound engineer is my profession and bowling is a hobby, sport, and my great passion. Have plenty of memorable moments, experience, and frequently testing new bowling balls.

James Alston

Sound engineer is my profession and bowling is a hobby, sport, and my great passion. Have plenty of memorable moments, experience, and frequently testing new bowling balls.

Sound engineer is my profession and bowling is a hobby, sport, and my great passion. Have plenty of memorable moments, experience, and frequently testing new bowling balls.

We will be happy to hear your thoughts

Leave a reply

Bowling Balls Guide
Enable registration in settings - general